Thread has been deleted
Last comment
Buying fk1 instead of g403
 | 
Germany MicroMM 
Hello as title says I'm probably buying fk1 instead of g403. G403 isn't really comfortable for me I mean the shape is very weird. Should I go with fk1 previously I had Razer deathadder which was perfect for my hand until laser stopped working.
2018-07-21 11:58
#1
Germany ayyy 
"I had Razer deathadder which was perfect for my hand until laser stopped working." then why dont you buy a deathadder again if it was perfect for you?
2018-07-21 12:00
#3
 | 
Germany MicroMM 
I don't want to risk again with it so I'm looking for a simmilar shape mouse.
2018-07-21 12:02
#9
 | 
Czech Republic fnx_2_majors 
1) did you have deathadder elite? 2) deathadder use optical sensor wtf
2018-07-21 12:08
#17
 | 
Germany MicroMM 
I didn't try elite.
2018-07-21 12:12
#47
 | 
Ecuador ARKZE 
razer DA chroma is crap died after 8 months, g403 is ok but has weird shape that was uncomfortable and i couldnt get that good grip on the mouse at most times. OG Rival was great until sides ruber disappeared and scroll doesnt click, senesi 310 is my first ambidexterous mouse and need to get used to it. might look and try rival 300, 310 or 600 Tried zowie at pgl major but didnt buy cuz of sensor, now they have ec-b series with 3360 that may be worth looking at, but i cant try any at local stores so probs wont buy ;G
2018-07-21 13:03
#10
 | 
Czech Republic fnx_2_majors 
i would recomend you ZOWIE EC1-B best shape for you, best sensor and best ZOWIE cable
2018-07-21 12:10
#18
 | 
Germany MicroMM 
I will look at that thanks.
2018-07-21 12:13
#78
Papichulo | 
United States SE1N 
+1 buying that one and I've already tried since a friend of mine has it. it's really good
2018-07-21 14:49
Looking for a similar mouse, deathadder is ergonomic and fk1 ambidextrous? logic?
2018-07-21 12:13
SO u want the similar shape and from DA u going for fk1? get ur shit together. Get another Da
2018-07-21 13:15
#59
 | 
Germany MicroMM 
No i'm not going with DA again there was too much problems with it
2018-07-21 13:16
So I would recommend to you EC Zowie series. I use Ec-1 and it's very comfortable. Fills my whole hand perfectly. Maybe not as cool looking as razer but in terms of shape I would call that great substitute for DA. I used Zowie fk1 before and say its like holdin cube(fk1, you feel the edges of mouse and u kinda struggle to find your perfect grip) vs holding a ball(ec1, u just cant go wrong with it)
2018-07-21 13:21
#67
 | 
Germany MicroMM 
Yeah, I'm probably going with ec2-a
2018-07-21 13:22
I have tried all those mice and the Finalmouse Ultralight Pro should be a great fit for you.
2018-07-21 13:21
Why not going with another Deathadder Elite if it fits your hand perfectly ? FK1 is much smaller. You could consider Rival 310 which is superior to all 3 of them mentioned above.
2018-07-21 12:00
#5
 | 
Germany MicroMM 
I don't want to go with Razer again.. I will look at rival thanks.
2018-07-21 12:04
I have Logitech G403 Wireless and it's the worst fucking mouse I have ever had i bought it for 100$+ and it's fucking garbage
2018-07-21 12:03
#6
 | 
Germany MicroMM 
Cause of the shape?
2018-07-21 12:04
Cuz it's fucking shit overall. Looks like shit, feels like shit, the shape is shit, Logitech app is shit
2018-07-21 12:05
#13
 | 
Germany MicroMM 
I can agree with shape and app that app is useless if u want to make a macro.
2018-07-21 12:11
Dude I can't play csgo with this mouse I've been struggling so much It's just impossible, it feels like sensor or broken or something, it just doesn't feel right in game
2018-07-21 12:12
#22
 | 
Germany MicroMM 
Well it's even worse for you, I can play csgo but I always feel uncomfortable even I'm using it for a year and a bit.
2018-07-21 12:15
What sens and dpi are u using?
2018-07-21 12:15
#25
 | 
Germany MicroMM 
400 and I stay at 2.2 . There was a moment when I used 3.1 for like a month so I can tell higher sens feels better but for me 2.2 works better.
2018-07-21 12:19
And what resolution do u use in-game?
2018-07-21 12:19
#28
 | 
Germany MicroMM 
1024x768 blackbars if I feel off I switch to streched.
2018-07-21 12:24
ty I will try
2018-07-21 12:24
Fk1 has a great shape
2018-07-21 12:04
#11
 | 
Germany MicroMM 
Yeah just checked measurements and i can see it's close to deathadder and the length is close too fk1 128mm while deathadder 127mm so I'm thinking it will fit my hand perfectly.
2018-07-21 12:10
you cant compare size from a ergonomic and ambidextrous mouse, they are completely different in shape and design its like comparing the measurements of a football and a penis
2018-07-21 12:14
#27
 | 
Germany MicroMM 
Oh didn't know that thanks.
2018-07-21 12:24
tf u mean nigga G403 is so perfect for almost every type of hand
2018-07-21 12:10
#16
 | 
Germany MicroMM 
No it's not look how many topic's there is about it's weird shape.
2018-07-21 12:12
literally the worst shape ive ever used, instantly sent it back to amazon after i got it
2018-07-21 12:25
#32
 | 
Germany MicroMM 
Should've done that too.
2018-07-21 12:29
why not ec-2
2018-07-21 12:32
#34
 | 
Germany MicroMM 
Lower weight works better for me.
2018-07-21 12:31
i understand ec-2 a is great and shape is kinda similar to deathadder tho
2018-07-21 12:32
#37
 | 
Germany MicroMM 
nvm I checked it it's pretty cool but what's the difference from fk1?
2018-07-21 12:37
just checked, the only difference is shape fk1 is more like steelseries sensei, ec is more like deathadder
2018-07-21 12:51
#39
 | 
Germany MicroMM 
What about ec1-A?
2018-07-21 12:55
ec1a is heavier and bigger
2018-07-21 12:57
#43
 | 
Germany MicroMM 
I don't think i want ec1-a at this point so i will probably go with ec2-a
2018-07-21 12:58
its really good, trust me
2018-07-21 12:59
Buy the Zowie ec1, its the exact same size.
2018-07-21 12:30
#40
 | 
Germany MicroMM 
ec1-a or ec1-b?
2018-07-21 12:56
#46
 | 
Netherlands RaVersoN 
That's not true. It depends on your grip. Me, with fingertip grip, was using FK1 for over three years, until it broke. Now I'm using G402 for like 6 months, but can't use this shit with my grip. I'm gonna switch back to Zowie mouses, but I'm gonna check out ZA11, because my cousin uses it and it fits well for me. I also had EC-1A, but this mouse isn't for fingertip, more for Claw/Palm. Make a good choice.
2018-07-21 13:01
#48
 | 
Germany MicroMM 
Yeah, that's a really hard choice when you cant feel it irl
2018-07-21 13:03
#49
 | 
Netherlands RaVersoN 
What's your mousegrip then?
2018-07-21 13:04
#50
 | 
Germany MicroMM 
Claw.
2018-07-21 13:05
#52
 | 
Netherlands RaVersoN 
Then choose for EC1A / EC1B if you have smaller hands. I was using FK1 and that mouse made me how I'm grabbing my mouse. You can't grab FK1 with Palm or Claw grip, that shit just doesn't fit well. And because you can't grab it, I was used to fingertip for 3 years. Then after buying EC1A, I couldn't use this mouse either, because it was for Claw/Palm grip. FK1 is symetry mouse for fingertip, EC1A for Claw/Palm grip.
2018-07-21 13:07
#54
 | 
Germany MicroMM 
I should check them irl and feel them but there is no way i can do that. I'm not sure do i have small hands or not is there any like method thing to measure your hand size?
2018-07-21 13:11
#56
 | 
Netherlands RaVersoN 
To be honest, I think I have very big hands. And when I was playing around with EC1A I felt this mouse was too big, even for my hands. So I guess the best choice for you would be EC2A.
2018-07-21 13:14
#61
 | 
Germany MicroMM 
So i found like a site where it kinda shows you how to measure it imgur.com/a/nCN7jMZ So my hands are about 18-20cm
2018-07-21 13:18
#62
 | 
Netherlands RaVersoN 
My hands are 21 cm.
2018-07-21 13:19
#69
 | 
Germany MicroMM 
Yeah, then definitely going with ec2-a.
2018-07-21 13:23
#70
 | 
Netherlands RaVersoN 
Wish you best of luck. Lemme know later if it fits well. :)
2018-07-21 13:23
#71
 | 
Germany MicroMM 
Thank you, I should get it on tuesday.
2018-07-21 13:25
#72
 | 
Netherlands RaVersoN 
I'll get mine ZA11 on tuesday or wednesday, finally back to a Zowie mouse!
2018-07-21 13:27
#73
 | 
Germany MicroMM 
I never had a zowie mouse before should be great experience.
2018-07-21 13:27
I have had mine for over 4years now. And no problems at all (ec1-a)
2018-07-23 23:43
#81
 | 
Germany MicroMM 
Yeah dude good to hear that ordered EC2-A already and should get it by tomorrow
2018-07-23 23:44
#57
Hobbit | 
United Kingdom salad! 
this isn't true. I claw the fk2 very comfortably. fk mice definitely aren't the best for palming unless your hands are tiny but you should be able to claw/fingertip any of them
2018-07-21 13:15
#60
 | 
Netherlands RaVersoN 
Trust me. I had EC1A. This shit wasn't any good for fingertip. The reason might be because I was using FK1 for 3 years and its a symmetrical mouse and EC1A/B is more for right-handed Claw/Palm grip.
2018-07-21 13:16
#64
Hobbit | 
United Kingdom salad! 
I didn't comment on the EC's. I just don't think he should discount the fk's just because he claws. I like clawing the fk2 a lot
2018-07-21 13:20
#68
 | 
Netherlands RaVersoN 
For Claw I'd rather suggest ZA11 because of big round beginning shape gamegear.be/images/zowie_za11_A.png I'm about to buy that one aswell, but for fingertip it also fits well, because it is symmetrical.
2018-07-21 13:22
#63
Germany ayyy 
you do realise that g402 and g403 and completely different mice??
2018-07-21 13:20
#42
ALEX | 
France BadGones 
fk1+ beast, the royalty mouse aka shox mouse.
2018-07-21 12:57
#45
World spuf 
what laser? Deathadder is optical LUL also if is no rush just wait until the new logitech is out, 1 month or so, good shape and everything.
2018-07-21 13:00
#55
 | 
Germany MicroMM 
My bad sir.
2018-07-21 13:12
#53
Hobbit | 
United Kingdom salad! 
I also didn't like the g403's shape, except I went for fk2. very happy with it
2018-07-21 13:08
my 1st deathadder (bought in 2007) lasted 7 years before breaking so i got another deathadder i tried other mice but theyre either too small or the shape is fucked up
2018-07-21 13:32
#75
 | 
Chile StfanoLELE 
I had the g403 and I sold it like 2 weaks ago and then I bought the fk2 And mate, it was one of the best decisions that I ever made The shape is just awesome for me
2018-07-21 13:37
Login or register to add your comment to the discussion.