Thread has been deleted
Last comment
Problems with autoexec
 | 
Sweden Nokkeri 
I tested a bunch of things trying to get a jumpbind. In the end what worked was going to Program x86 --> Steam --> userdata --> (my steam ID) --> 730 --> local --> cfg and then putting the commands into the config file at the end THE problem though is everytime i restart CSGO the commands i put in disappear. What to do? TL;DR. Commands in config (autoexec) disappears
2019-04-24 13:53
#1
kennyS | 
United Kingdom scuzzz 
basically what you need to do is scouting
2019-04-24 13:56
youtube
2019-04-24 13:56
#3
 | 
Sweden Nokkeri 
I've looked and havent found anything for when it disappears everytime i restart cs
2019-04-24 13:58
reload windows or whatever the word is
2019-04-24 13:59
Just find a map that binds it for you
2019-04-24 13:59
#6
 | 
Sweden Nokkeri 
Does those still exist?
2019-04-24 14:06
Do those still exist*, and yes, they do.
2019-04-24 14:07
#9
 | 
Sweden Nokkeri 
does these still exist is what i thought i wrote. Tried one out, didnt work at all
2019-04-24 14:15
They work
2019-04-24 14:19
#8
hardstyle | 
Spain rmkx 
Is you config in red only mode? Check it, and if it is, uncheck the box.
2019-04-24 14:08
#10
 | 
Sweden Nokkeri 
What does this mean?
2019-04-24 14:15
#12
hardstyle | 
Spain rmkx 
Go to your config file, right click -> properties and on the bottom of the window that appears look for read only, and if it's checked, uncheck it. Dunno why it would ever be in read-only mode, but who knows.
2019-04-24 14:23
#13
 | 
Sweden Nokkeri 
Nope thats not checked Thx for the advice though
2019-04-24 14:25
#14
hardstyle | 
Spain rmkx 
Okay, but let me get this clear. You are putting those commands in the config file, or the autoexec one? because they are different.
2019-04-24 14:28
#15
 | 
Sweden Nokkeri 
config
2019-04-24 14:28
#16
hardstyle | 
Spain rmkx 
Just done one myself, try creating an autoexec.cfg file and paste your jumpthrow scrip in that file, and in the config.cfg file type exec autoexec.cfg You can check if you're config is loaded by typing this at the end of the autoexec file: clear echo "JUMPTHROW LOADED." and checking if that message shows on the console after you start the game.
2019-04-24 14:37
Login or register to add your comment to the discussion.